Nugen Machineries Limited

NC Hydraulic Shearing Machine, Shearing Machine Manufacturer

The machines are supplied with easy to use axis NC Controlled heavy duty back guage (Range 760 MM) with PLC based controller on years of manufacturing experience. The emphasis is on speed, accuracy and repeatability.

The general characteristics of the controller are Programming of axis position (mm), position correction, step repetition – 16 steps, each step can be repeated 99 times, Alphs – numeric LCD 2*16 display, protection against miscounting.

Short Facts:

1) Synchronization of cylinders by differential area principle eliminates complicated hydraulic circuits and imported servo valves.

2) The ram is guided by three point roller guides with replaceable hardened liners.

3) Variable rake angle adjustment by selector switch

4) Rapid blade gap adjustment by levers calibrated in thickness.

5) Table provided with hardnend transfer bars and front sheet supports for easy feeding of plates.

6) Shadow light indicator, Front gauging by disappearing stoppers mounted on left squaring arm and motorized backgauge are provided.

7) Positive holding by hydraulic hold downs before shearing avoids slippage of sheets.

8) Hydraulic cylinder with imported sealing elements duly honed tubes and hard chrome plates rods offer very long service life.

9) NC Back Gauge

Additional Information:

• Item Code: HVRNC

Extra Edge Hydraulic Shearing Machine

Short Facts:

1) The blade movement is powered by a relatively small, single hydraulic cylinder driving a pair of “bell cranks” arms. The mechanical advantage gained by this system provides all the force necessary for full shearing capacity.

2) Rake Angle adjustment by push button gives twist free shearing.

3) Easy and fast motorized blade gap setting arrangement by push button.

4) Guides are located on outside the frames to provide accurate guidance to cutting beam.

5) This allows visual inspection of the guides for wear without dismantling the ram.

6) Built in hydraulic overload protects the machine and the blades against damage due to misuse or overload.

7) Hydraulic hold downs provide positive gripping of plates while shearing of narrow.

Additional Information:

• Packaging Details: 🟦 Trimans® Hydraulic Shears (Cutting / Shearing Machines) Mfg. by NuGEN : 🟥 🔵 Fixed Rake Angle Conventional Hydraulic Shears Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🔵 Fixed Rake Angle NC Hydraulic Shears Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🔵 Variable Rake Angle NC Hydraulic Shears Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🔵 Variable Rake Angle CNC Hydraulic Shears Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🔵 Extra Edge NC and CNC Hydraulic Shears Shearing Capacity / Range : 20mm to 32mm (Thickness) & 3000mm to 5000mm (Length).

Additional Information:

• Packaging Details: Trimans Variable Rake Angle NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with replaceable hardened liners. All four sides of top and bottom HCHCr Blades are usable. Synchronization of cylinders by differential area principle.

Trimans Variable Rake Angle, NC - Numerically Controlled Hydraulic Shearing Machines for MS up to 16 mm thickness.• Precision Cuts.• Minimum Maintenance Machines.• Powerful Hydraulics.• D2 HCHCr Blades - Ultra Precision.• Additional Upgrades (Yes).Trimans Variable Rake Angle NC Hydraulic Shears, operate with a variable rake angle system, where the operator has the ability to adjust the rake angle (cutting angle). A higher rake angle for shearing thick metals, while switching to a low rake angle when cutting thinner materials.The Hydraulic Hold Down Cylinders clamp and hold the workpiece, to prevent unnecessary movements; whereas, the sheet support arms stabilize the process of shearing.The transfer bars or transfer balls smoothen the process by offering maximum resistance against friction.Numerical Controllers ensure desired cuts are achieved effortlessly. Highly reliable and long lasting Electric Control Panel, Branded Components, Advance Circuits and Wiring ensure utmost productivity.NuGEN's Signature Hydraulic Cylinders and Hydraulic Power Packs assure decades of troublefree operation. Hydraulic cylinder with imported sealing elements, duly honed tubes and hard chrome plate rods offer very long service life.Blazing Fast Performance, Low Noise of Operation, Ultra Precision, Unbeatable Accuracy, Unmatched Durability and Robust Built are hallmarks of Trimans® Hydraulic Shears, passionately manufactured by NuGEN Machineries Ltd., since 1982.

Additional Information:

• Packaging Details: Trimans Fixed Rake Angle Conventional and NC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🟦 AUTOMATION 🟥 Conventional (Manually Adjustable Back Gauge) and NC (Semi Automatic, Numerically Controlled Back Gauge). 🟦 FIXED BLADE GAP 🟥 Affordable price point. Less power consumption, least wear & maintenance reduces operating costs and downtime. 🟦 CHOICE OF BACK GAUGE 🟥 Ram Roller Guided System incorporating signature TRIMANS Torque Tube Design. Easier cutting length adjustment, Pre-Determined / Fixed Blade Gap, Available with Conventional and NC Back Gauge. 🟦 CUTS ACCURATELY 🟥 High cutting quality is ensured through the Rigid Ram Roller Guided System along with HCHCr Blade and Low Fixed Rake Angle. 🟦 PERFORMANCE READY 🟥 Roller Guides on Ram with hardened replaceable liners give ultimate life and play-free movement of the ram. Least impact loads give blade an exceptional life. Noiseless operation which improves working atmosphere and eliminates need to isolate the machine. Can be supplied with additional attachments like Rear Sheet Support Mechanism. 🟦 DURABLE AND SAFE 🟥 A tough, robust and well dimensional structure, made out of IS 2062 Gr. B, Ultrasonically - Physically - Chemically Tested Steel Plates. Instantaneous ram stoppage and Hydraulic Overload Safety provides maximum safety for the operator and machine.

• Trimans Fixed Rake Angle Conventional and NC Hydraulic Shears • Trimans Variable Rake Angle NC and CNC Hydraulic Shears 

The machines are supplied with easy to use axis NC Controlled heavy duty back gauge (Range 760 MM) with PLC based controller on years of manufacturing experience. The emphasis is on speed, accuracy and repeatability.

• Synchronization of cylinders by differential area principle eliminates complicated hydraulic circuits and imported servo valves.
• The ram is guided by three point roller guides with replaceable hardened liners.
• Variable rake angle adjustment by selector switch
• Rapid blade gap adjustment by levers calibrated in thickness.
• Table provided with hardened transfer bars and front sheet supports for easy feeding of plates
• Shadow light indicator, Front gauging by disappearing stoppers mounted on left squaring arm and motorized back gauge are provided.
• Positive holding by hydraulic hold downs before shearing avoids slippage of sheets.
• Hydraulic cylinder with imported sealing elements duly honed tubes and hard chrome plates rods offer very long service life.
• NC Back Gauge

NuGEN Machineries Limited, is a leading manufacture and exporter of ‘Trimans’  Hydraulic Press Brake (viz. Conventional Hydraulic Press Brake, NC Hydraulic Press Brake and CNC Synchro Hydraulic Press Brakes) and Hydraulic Shearing Machine (viz. Fixed Rake Angle Hydraulic Shearing Machine, NC Hydraulic Shearing Machine and Extra Edge Hydraulic Shearing machine) and other sheet metal working machines in India, since the year 1982. 
We are manufacturing CNC Hydraulic Shearing Machine. 

Extra Edge Hydraulic Shearing Machine

Short Facts:

1) The blade movement is powered by a relatively small, single hydraulic cylinder driving a pair of “bell cranks” arms. The mechanical advantage gained by this system provides all the force necessary for full shearing capacity.

2) Rake Angle adjustment by push button gives twist free shearing.

3) Easy and fast motorized blade gap setting arrangement by push button.

4) Guides are located on outside the frames to provide accurate guidance to cutting beam.

5) This allows visual inspection of the guides for wear without dismantling the ram.

6) Built in hydraulic overload protects the machine and the blades against damage due to misuse or overload.

7) Hydraulic hold downs provide positive gripping of plates while shearing of narrow.

• Synchronization of cylinders by differential area principle eliminates complicated hydraulic circuits and imported servo valves.
• The ram is guided by three point roller guides with replaceable hardened liners.
• Variable rake angle adjustment by selector switch
• Rapid blade gap adjustment by levers calibrated in thickness.
• Table provided with hardnend transfer bars and front sheet supports for easy feeding of plates
• Shadow light indicator, Front gauging by disappearing stoppers mounted on left squaring arm and motorized backgauge are provided.
• Positive holding by hydraulic hold downs before shearing avoids slippage of sheets.
• Hydraulic cylinder with imported sealing elements duly honed tubes and hard chrome plates rods offer very long service life.
• NC Back Gauge

Additional Information:

• Item Code: HVR
• Delivery Time: AsperMachineCapacity

Additional Information:

• Packaging Details: Trimans Variable Rake Angle NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with replaceable hardened liners. All four sides of top and bottom HCHCr Blades are usable. Synchronization of cylinders by differential area principle.

Additional Information:

• Packaging Details: Trimans Variable Rake Angle NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with replaceable hardened liners. All four sides of top and bottom HCHCr Blades are usable. Synchronization of cylinders by differential area principle.

Additional Information:

• Packaging Details: 🟦 AUTOMATION 🟥 Conventional (Manually Adjustable Back Gauge) and NC (Semi Automatic, Numerically Controlled Back Gauge). 🟦 FIXED BLADE GAP 🟥 Affordable price point. Less power consumption, least wear & maintenance reduces operating costs and downtime. 🟦 CHOICE OF BACK GAUGE 🟥 Ram Roller Guided System incorporating signature TRIMANS Torque Tube Design. Easier cutting length adjustment, Pre-Determined / Fixed Blade Gap, Available with Conventional and NC Back Gauge. 🟦 CUTS ACCURATELY 🟥 High cutting quality is ensured through the Rigid Ram Roller Guided System along with HCHCr Blade and Low Fixed Rake Angle. 🟦 PERFORMANCE READY 🟥 Roller Guides on Ram with hardened replaceable liners give ultimate life and play-free movement of the ram. Least impact loads give blade an exceptional life. Noiseless operation which improves working atmosphere and eliminates need to isolate the machine. Can be supplied with additional attachments like Rear Sheet Support Mechanism. 🟦 DURABLE AND SAFE 🟥 A tough, robust and well dimensional structure, made out of IS 2062 Gr. B, Ultrasonically - Physically - Chemically Tested Steel Plates. Instantaneous ram stoppage and Hydraulic Overload Safety provides maximum safety for the operator and machine.

Additional Information:

• Packaging Details: 🟦 Trimans® Hydraulic Shears (Cutting / Shearing Machines) Mfg. by NuGEN : 🟥 🔵 Fixed Rake Angle Conventional Hydraulic Shears Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🔵 Fixed Rake Angle NC Hydraulic Shears Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🔵 Variable Rake Angle NC Hydraulic Shears Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🔵 Variable Rake Angle CNC Hydraulic Shears Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🔵 Extra Edge NC and CNC Hydraulic Shears Shearing Capacity / Range : 20mm to 32mm (Thickness) & 3000mm to 5000mm (Length).

Additional Information:

• Packaging Details: Trimans Extra Edge NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 2mm to 10mm (Thickness) & 1500mm to 3000mm (Length). 🟦 PRO-GRADE METAL CUTTING 🟥 The blade movement is powered by a relatively small, single hydraulic cylinder driving a pair of Bell Cranks arms. The mechanical advantage gained by this system provides all the force necessary for an ultimate shearing capacity. 🟦 ULTRA PRECISION 🟥 Rake Angle Adjustment by push button gives twist free shearing. Easy and fast motorized blade gap setting arrangement by push button. NC and CNC variants, Shears / Cuts workpiece up to 32 mm thick. 🟦 MAXIMUM PRODUCTIVITY 🟥 Guides are located on outside the frames to provide accurate guidance to cutting beam. This allows visual inspection of the guides for wear without dismantling the ram. Inbuilt Hydraulic Overload Safety Feature protects the Hydraulic Shearing Machine and the blades against damage due to misuse or overload. 🟦 ULTIMATE STRENGTH 🟥 NuGEN Signature Built - IS 2062 Gr. B, Ultrasonically - Physically - Chemically Tested Steel Plates. Hydraulic Hold Downs provide positive gripping of plates while shearing. Both top and bottom blades have four usable edges and are interchangeable. Robust Hydraulic System, Advanced Control Panels, Wide Range of Accessories and Add-Ons. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades.

Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with  

Additional Information:

• Packaging Details: Trimans Variable Rake Angle NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with replaceable hardened liners. All four sides of top and bottom HCHCr Blades are usable. Synchronization of cylinders by differential area principle.

Additional Information:

• Packaging Details: Trimans Variable Rake Angle NC and CNC Hydraulic Shears mfg. by NuGEN Machineries Ltd. Shearing Capacity / Range : 4mm to 25mm (Thickness) & 2000mm to 5000mm (Length). 🟦 AUTOMATION 🟥 NC (Semi Automatic) and CNC (Advanced Automation). 🟦 ADJUSTABLE BLADE GAP 🟥 Variable Rake Angle adjustments by selector switch. Rapid blade gap adjustment by levers calibrated in thickness. 🟦 ENHANCED AUTOMATION 🟥 User friendly, Motorized NC and CNC Back Gauge. Advanced NC and CNC Controllers. High Precision Magnetic Linear Scales / Linear Encoders in CNC Variants. 🟦 UNBEATABLE PRODUCTIVITY 🟥 Easiest and fastest blade clearance arrangement. Shadow Light Indicator, Front Gauging by disappearing stoppers on left squaring arm provided. Optional / Additional : Rear Sheet Support Mechanism 🟦 ULTIMATE STRENGTH 🟥 Table provided with Hardened Transfer Bars / Balls and Front Sheet Supports for easy feeding of plates. NuGEN Signature Tough and Robust Built ensures Ultimate Productive Life. Hydraulic Cylinder with Imported Sealing Elements, Duly Honed Tubes and Hard Chrome Plates & Rods, offer very long service life. Engineered keeping in mind Minimum Maintenance; a Trimans® Machine lasts for Decades. 🟦 ACCURATE CUTS 🟥 Firm and Positive holding by Hydraulic Hold Downs before shearing, avoids slippage of workpiece. 🟦 ULTRA PRECISION 🟥 The ram is guided by three point roller guides with replaceable hardened liners. All four sides of top and bottom HCHCr Blades are usable. Synchronization of cylinders by differential area principle.